Description
TECHNICAL SPECIFICATIONS
| General Info |
|---|
| Model | Sinch 2.5 Ebike |
| Weight | 68 lbs |
| Total Weight Limit | 300 lbs |
| Rider Height | 4’11” – 6’2″ |
| Box Size | 43 x 24 x 33 |
| Class | Class 2 Ebike |
| Water Resistance | IPX4 |
| Bike Safety Certifications | TUV Rheinland Certified in accordance with UL 2849 |
| Battery Safety Certifications | Certified to UL 2271 |
| Range | Up to 55 Miles |
| Frameset |
|---|
| Frame | 6061 Single-Butted Folding Aluminum Alloy with Internal Battery |
| Fork | Aventon coil fork with lock out and black stanchions. |
| Rear Spacing | 177mm |
| Fork Spacing | 135mm |
| Wheelset |
|---|
| Front Wheel | 20×4″, 36-spoke, double-wall aluminum fat tire rim, black finish, with a nutted axle, 13g stainless steel spokes (173mm NDS/175mm DS), 135mm spacing, Schrader valve. |
| Rear Wheel | 20×4″, 36-spoke, double-wall aluminum fat tire rim, black finish, hub drive motor with a nutted axle, 12g stainless steel spokes (128mm NDS/127mm DS), 177mm spacing, Schrader valve. |
| Tires | Innova IA-2579 20×4.0 |
| Ebike System |
|---|
| Speed | Class 2 |
| Motor | 48v, 500w brushless hub motor |
| Motor Torque | 60Nm |
| Display | Aventon BC147 |
| Battery | Removable Internal Lithium-ion Battery, 48.8V, 14Ah (636.4Wh) |
| Battery Weight | 7.6 lbs |
| Controller | 48v 22A |
| Throttle | Aventon LH Handlebar Mounted |
| Sensors | Double Sided Bottom Bracket Torque Sensor |
| Charger | 48V, 3 Amp Fast Charger |
| Charging Time | 4-5 Hours |
| Lights | Front and rear lights integrated |
| Brakes |
|---|
| Front Brake Rotor | 180mm 6 bolt |
| Rear Brake Rotor | 180mm 6 bolt |
| Drivetrain |
|---|
| Rear Derailleur | Shimano Altus RD-M310 8 Speed |
| Chain | 114 Link, 8 Speed |
| Cassette | 13-28T / 8 Speed Shimano CS HG200-8 |
| Chainring | 52 tooth |
| Chainring BCD | 130 |
| Crankset | 3pc, 170mm crank arm |
| Bottom Bracket | Square Taper, Sealed, Dual-Sided Torque Sensor, 100×159.5mm |
| Pedals | 9/16″ Composite folding pedals |
| Cockpit |
|---|
| Saddle | Aventon Saddle |
| Seatpost | Aventon Suspension Seatpost, 30.9, 350mm Length |
| Seat Clamp | 34.9mm Quick Release |
| Handlebars | Aluminum 25.4mm diameter, 580mm wide |
| Grips | Aventon glue on grips |
| Headset | Sealed Bearing Headset ZS44/28.6| ZS55/40 |
| Included Accessories |
|---|
| Kickstand | Included, rear mount |
| Rear Rack | Included |
| Rear Rack Weight Limit | 55 lbs |
| Fenders | Included |
Technical Overview
Sinch 2.5 ships as a Class II ebike, with pedal assist and throttle. Sinch 2.5 will also operate with the throttle unplugged and removed, should you want to ride in an area where throttles are prohibited. Aventon ebikes are built to the IPX4 water-resistant standard. IPX4 means that your bike is resistant to water splashes from any direction. This means it’s OK to ride your ebike in light rain. It won’t be harmed by spray from a wet road or raindrops. Your ebike is not intended to be exposed to prolonged rain, be submerged, or subjected to a pressurized spray. Do not use a pressure washer or sprayer to clean your ebike. *Max range determined using PAS Eco throughout flat terrain with a rider weight of 160 lb.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.